
Details
Solution type
Topical area
This case study is part of a project catalogue produced by ReUseHeat to inspire how to utilize excess heat from urban sources for heating and cooling purposes. The catalogue contains 25 existing or planned projects, 12 of which are Danish and 13 from other European countries.
Facts about the case |
|
Installed capacity: 1.0 MW Heat source: Industrial excess heat from cooling. Heat pump COP: 5.0 Temperatures: Heating can be delivered at temperatures between 70°C and 90°C. |
Investment cost: €295,000 (€161,000 financed by Glostrup Varme and €134,000 financed by Kopenhagen Fur) Period: Finished in 2017 |
Description
Kopenhagen Fur has from the fall of 2017 been allowed to send excess heat to the local district heating company, Glostrup Varme. The excess heat is from Kopenhagen Furs large cold storage, where mink coats are stored before they are redistributed. Hereby excess heat is utilized instead of being chilled using coolers.
Extracting excess heat from the cold storage facility at Kopenhagen Fur, the previous refrigeration units were replaced with a heat pump. The project was a part of Kopenhagen Fur, which needed a new cooling unit for both process and comfort cooling. The heat pump is expected to deliver cooling with an annual capacity of 1 MW. Glostrup Varme has a next-door heating central where the excess heat from Kopenhagen Fur is sent to the district heating network, supplying local consumers with heating from mink coat storage.
Currently, Kopenhagen Fur is supplied with district heating from Glostrup Varme. Glostrup Varme is, however, a part of a major district heating transmission network called VEKS, which supplies multiple district heating companies around Greater Copenhagen. Kopenhagen Fur is expected to deliver a baseload of 1 MW heating to the network, a relatively small capacity compared to the total VEKS network. The heat pump can produce 6000 MWh of heating annually, delivered at approximately 70 degrees Celsius to the district heating network. If needed, the heat pump can deliver heating at 90 degrees Celsius. The COP is expected to be 5.0 if heating is delivered at 70 degrees Celsius.
The total cost is € 295,000, of which € 161,000 is financed by Glostrup Varme and € 134,000 is financed by Kopenhagen Fur. The total heat pump costs are approximately € 134,000 higher than if only the cooling system was constructed.
Copenhagen, Denmark
ReUseHeat, Finished in 2017, IVL Swedish Environmental Research Institute
Glostrup Forsyning
External links:
Kopenhagen Fur, Glostrup Varme, VEKS, Rambøll, Handbook – 25 cases of urban waste heat recovery
Replicability |
Low |
Medium |
High |
---|---|---|---|
Authorizative easiness | x | ||
Adaptability to different climate conditions | x | ||
Technology easy-to-implement (No needs of specific technical requirements) | x | ||
Easy-to-implement (No needs of specific technical requirements) | x | ||
Easy-to-operate (No needs of specific technical requirements) | x | ||
Opportunity of integrating waste energy sources | x | ||
CAPEX needed for the deployment of the solution | x |